Each pair shows one room twice so you can see what a particular kind of project changes, with the typical cost and turnaround for a project that size. Turnaround runs from the free measure to install. When you want to know what it would look like in your own home, Clovis Custom Cabinets will measure it and give you a fixed written quote for free.

Kitchen: two-tone shaker on the window wall

Design concept, before: a kitchen wall with honey oak cabinets, a white tile countertop and a double sink under the windowDesign concept, after: the same wall with white shaker upper cabinets, white oak lower cabinets, a quartz countertop and vertical tile backsplash

The project. Oak raised-panel cabinets and a tiled counter, replaced with white shaker uppers, white oak shaker bases, a quartz top and a full-height tile backsplash. The window and the plumbing stay where they are.

Typical cost
$8,000 to $19,000cabinetry for about 16 ft of wall, custom tier
Turnaround
5 to 7 weeks3 to 5 days on site

Refacing: same layout, new fronts

Design concept, before: a U-shaped kitchen with dark stained oak cabinets and a yellow tile backsplashDesign concept, after: the same kitchen with white shaker cabinet fronts, the same countertops, backsplash and floor

The project. Dark oak doors traded for white shaker fronts and slim bar pulls. The countertops, tile backsplash, flooring and sink all stay, which is why refacing typically runs 30 to 50 percent below replacement.

Typical cost
$3,000 to $7,500about 30 ft of cabinets refaced
Turnaround
2 to 3 weeks3 to 5 days on site

Closet: from one shelf to a system

Design concept, before: an empty reach-in closet with one white shelfDesign concept, after: the same closet with double hanging rods, shelves and three drawers

The project. A reach-in with a single shelf becomes double hanging, adjustable shelves and a bank of three drawers, in exactly the same opening.

Typical cost
$1,200 to $4,000about 7 ft reach-in, installed
Turnaround
2 to 3 weeks1 day on site

Vanity: built to the wall you have

Design concept, before: a worn dark oak bathroom vanity with a cultured marble topDesign concept, after: the same bathroom with a white oak shaker vanity, drawer banks and a white quartz top

The project. A worn dark oak vanity with a cultured marble top, replaced with a white oak shaker vanity, drawer banks on both sides, an undermount sink and a quartz top.

Typical cost
$3,000 to $4,500custom vanity cabinetry
Turnaround
3 to 4 weeks1 to 2 days on site

Laundry: somewhere to fold

Design concept, before: a laundry room with honey oak upper cabinets, a short counter and top-load machinesDesign concept, after: the same laundry room with flat-panel upper cabinets, a drawer base and a counter over front-load machines

The project. Oak uppers and a short counter, replaced with flat-panel uppers, a drawer base and one continuous counter that runs over both front-load machines.

Typical cost
$3,000 to $7,500about 9 ft of uppers and base
Turnaround
3 to 4 weeks1 to 2 days on site

Garage: a full wall of storage

Design concept, before: an empty garage wall with a concrete floorDesign concept, after: the same garage wall lined with gray cabinets and a butcher block workbench

The project. A bare garage wall becomes tall cabinets at each end, a run of uppers, drawer and door bases and a butcher block workbench, everything off the floor.

Typical cost
$7,000 to $16,000about 20 ft of wall
Turnaround
3 to 4 weeks2 to 3 days on site

Want to see it in your room?

Free measure at your home, then a fixed written quote. No deposit before you have both.

Call now Get quote
Call (559) 314-3498